7-7. BRAKE LINES REPLACEMENT (Cont’d)
c. Rear Caliper-to-Intermediate Brake Line Removal
TM 9-2320-387-24-1
7-20
Change 1
d. Rear Caliper-to-Intermediate Brake Line Installation
1.
Install left rear brake line (1) on intermediate brake line (3) and bracket (2) with clip (4).
2.
Install clamp (11) and brake line (1) on bracket (12) with capscrew (10).
3.
Install clamp (5) on yoke (6) with washer (8) and capscrew (9).
4.
Install washer (7.1) and caliper adapter fitting (7.2) on caliper (7).
5.
Connect left rear brake line (1) to caliper adapter fitting (7.2).
1.
Disconnect left rear brake line (1) from caliper adapter fitting (7.2).
1.1.
Remove caliper adapter fitting (7.2) and washer (7.1) from caliper (7). Discard caliper adapter
fitting (7.2).
2.
Remove capscrew (9), washer (8), and clamp (5) from yoke (6).
3.
Remove capscrew (10), clamp (11), and brake line (1) from bracket (12).
4.
Remove clip (4) and left rear brake line (1) from bracket (2) and intermediate brake line (3).
NOTE
Left side shown, right side similar.
