TM 9-2320-362-14&P
3-25. CABLE ASSEMBLY W64 REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual Reference
General mechanics tool kit:
TM 9-2320-280-20
automotive (Item 1, Section III,
Appendix B)
1.
Disconnect cable assembly W64 (1) from connector 12J1 (11) on tach/
hourmeter box (2).
2.
Unlatch and open storage box cover (4).
3.
Remove four screws (6) and two washers (7) that secures front
floorboard (8) to transmission tunnel (9).
4.
Lift front floorboard (8) and pull cable assembly W64 (1) through
storage box (5) and front floorboard (8).
5.
Disconnect cable assembly W64 (1) from connector
and remove from truck.
10J2 (3) on shelter
I
b. Installation
I
1.
Connect cable assembly W64 (1) to connector 10J2 (3) on shelter.
2.
Feed cable assembly W64 (1) through holes (10) in front floor-
board (8) and storage box (5).
3.
Connect cable assembly W64 (1) to connector 12J1 (11) on tach/
hourmeter box (2).
4.
Secure front floorboard (8) to transmission tunnel (9) with two
washers (7) and four screws (6).
5.
Close and latch storage box cover (4).
3-48
