TM 9-2320-362-14&P
3-22. STORAGE BOX REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanics tool kit:
Cab rear panel is rolled upward
automotive (Item 1, Section III,
(TM 9-2320-280-10)
Appendix B)
Manual Reference
TM 9-2320-280-10
1.
Unlatch and open storage box cover (5).
2.
Disconnect cable assembly W64 (4) from connector 10J2 (1) and cable
assembly CX-4723/VRC (3) from connector 10J1 (2).
3.
Remove two screws (7) and washers (8) that attach storage box (6) to
front floorboard (9).
4.
Lift storage box (6) and pull cable assembly W64 (4) and cable assembly
CX-4723/VRC (3) through cutout (10). Remove storage box (6).
b. Installation
1.
Feed cable assembly W64 (4) and cable assembly CX-4723/VRC (3)
through cutout (10) in storage box (6).
2,
Install storage box (6) to front floorboard (9) and secure with
two washers (8) and screws (7).
3.
Connect cable assembly W64 (4) to connector 10J2 (1) and cable
assembly CX-4723/VRC (3) to connector 10J1 (2).
4.
Close and latch storage box cover (5).
3-42