TM 9-2320-280-20-3
12-186. UNDERBODY PROTECTION KIT REPLACEMENT (Cont’d)
12-298
Change 1
1.
Remove six locknuts (6), twelve washers (2), six capscrews (3), four rubber washers (5), and two
transmission support brackets (4) from intermediate shield (1) and transmission mount cross-
member (7). Discard locknuts (6) and rubber washers (5).
2.
Remove locknut (8), two washers (9), and capscrew (10) from right support bracket (15) and right
side frame rail (16). Discard locknut (8).
3.
Remove locknut (22), two washers (19), and capscrew (18) from left support bracket (24), engine
mount bracket (17), and left side frame rail (23). Discard locknut (22).
4.
Remove four locknuts (14), eight washers (12), four capscrews (11), and right side support
bracket (15) from right side mounting bracket (13). Discard locknuts (14).
5.
Remove four locknuts (26), eight washers (21), four capscrews (20), and left side support bracket (24)
from left side mounting bracket (25). Discard locknuts (26).
6.
Remove two locknuts (29), four washers (30), two capscrews (31), and intermediate shield (1) from
front crossmember (27) and front shield (28). Discard locknuts (29).
c. Intermediate Shield Removal
