b. Disassembly
c. Assembly
TM 9-2320-280-20-3
12-144. REAR RADIO RACK MAINTENANCE (Cont’d)
4. Remove two capscrews (36), washers (37), antenna cables (14), clamps (38), and radio rack (17) from
cargo floor (23).
5. Remove two capscrews (35), washers (34), cargo tiedowns (33), and radio rack braces (29) from cargo
floor (23).
6. Remove two capscrews (16), washers (15), and radio rack (17) from cargo floor (23).
1. Remove four locknuts (7), washers (8), capscrews (10), washers (8), and two braces (9) from
supports (6). Discard locknuts (7).
2. Remove three locknuts (12), washers (4), capscrews (3), washers (4), and two braces (13) from
shelves (5). Discard locknuts (12).
3. Remove seven locknuts (11), washers (1), capscrews (2), washers (1), and two shelves (5) from
supports (6). Discard locknuts (11).
1.
2.
3.
NOTE
Assemble shelves to supports with holes designated “A” facing in
the same direction.
Install two shelves (5) on supports (6) with seven washers (1), capscrews (2), washers (1), and
locknuts (11). Tighten locknuts (11) to 15 lb-ft (20 N•m).
Install two braces (13) on shelves (5) with three washers (4), capscrews (3), washers (4), and
locknuts (12). Tighten locknuts (12) to 8 lb-ft (11 N•m).
Install two braces (9) on supports (6) with four washers (8), capscrews (10), washers (8), and
locknuts (7). Do not tighten locknuts (7).
12-226
