a. Removal
TM 9-2320-280-20-3
12-144. REAR RADIO RACK MAINTENANCE
This task covers:
a. Removal
c. Assembly
b. Disassembly
d. Installation
INITIAL SETUP:
Applicable Models
Manual References
M998, M998A1, M1038, M1038A1
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanic’s tool kit:
• Speaker stop removed (para. 12-135) if installed.
automotive (Appendix B, Item 1)
• Handset brackets removed (para. 12-143).
Materials/Parts
Eight locknuts (Appendix G, Item 58)
Eight locknuts (Appendix G, Item 65)
1. Remove two locknuts (9), washers (10), capscrews (12), washers (10), and insulation retainer (11)
from radio rack (2). Discard locknuts (9).
2. Remove two screws (16), retainer (15), and insulation (14) from cargo floor (8) and left brace (13),
and pull insulation (14) and two left antenna cables (1), if present, away from radio rack (2).
3. Remove two locknuts (7), washers (4), capscrews (5), washers (4), power cable (3), and two clamps (6)
from radio rack (2). Discard locknuts (7).
12-225
