a. Removal
TM 9-2320-280-20-3
b. Installation
12-125. TROOP/CARGO WINTERIZATION ANTENNA MOUNTING BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M998, M998A1, M1038, M1038A1
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanic’s tool kit:
• AS 1729/VRC antenna removed
automotive (Appendix B, Item 1)
(para. 12-137), if installed.
Materials/Parts
• AB-652/GR antenna removed (para. 12-139),
if installed.
Three locknuts (Appendix G, Item 101)
1. Remove three locknuts (4), washers (3), capscrews (8), washers (6), and antenna mounting
bracket (2) from right end closure (7). Discard locknuts (4).
2. Remove three spacers (5) from right end closure (7).
3. Remove grommet (1) from antenna mounting bracket (2).
1. Install grommet (1) on antenna mounting bracket (2).
2. Install three spacers (5) on right end closure (7).
3. Install antenna mounting bracket (2) on right end closure (7) with three washers (6), capscrews (8),
washers (3), and locknuts (4). Tighten locknuts (4) to 15 lb-ft (20 N•m).
FOLLOW-ON TASKS: • Install AS 1729/VRC antenna (para. 12-137), if removed.
• Install AB-652/GR antenna (para. 12-139), if removed.
12-197
