b. Installation
TM 9-2320-280-20-3
12-121. TROOP/CARGO WINTERIZATION TROOP SEAT ASSEMBLY AND BOW
REPLACEMENT (Cont’d)
1.
2.
3.
4.
5.
6.
7.
8.
Install block (6) on cargo bulkhead (4) with two screws (5), washers (7), and locknuts (8).
NOTE
Support assembly must be installed with narrow offset to outside
of vehicle and rounded side up.
Install support assembly (16) on “B” pillar (17) with three capscrews (15), washers (18), and
locknuts (19).
Install troop seat assembly (9), folded in stowed position, into support assembly (16) and on
wheelhousing (14).
Install front wheelhousing bracket (22) on wheelhousing (14) with two capscrews (21), washers (23),
and locknuts (24). Tighten locknuts (24) to 49 lb-ft (66 N•m).
Install rear corner troop seat bracket (29) on wheelhousing (14) with three washers (27),
capscrews (28), washers (26), and locknuts (25). Tighten locknuts (25) to 96 lb-in. (11 N•m).
Install troop seat assembly (9) on wheelhousing (14) with six washers (12), capscrews (13),
washers (10), and locknuts (11). Tighten locknuts (11) to 96 lb-in. (11 N•m).
Install front bow (20), middle bow (2), and rear bow (3) on slots on outside of troop seat
assembly (9).
Install plate (1) on front bow (20).
12-192
