12-39. ARCTIC HEATER PLENUM COVER REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Remove three rivets (1) and retainer (2) from plenum (6).
2.
Remove three rivets (5) and retainer (4) from plenum (6).
3.
Peel cover (3) back and remove from plenum (6).
4.
Clean remaining adhesive from surface of plenum (6).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Six rivets (Appendix G, Item 177.1)
b. Installation
TM 9-2320-280-20-3
Change 1
12-57
NOTE
Ensure surface is free of dirt and oil before applying adhesive
backed cover.
1.
Peel backing paper from adhesive-backed cover (3).
NOTE
Ensure cover is attached to all bends and corners.
2.
Install cover (3) on plenum (6) by pressing cover (3) firmly in place.
NOTE
Refer to para. 10-66 for rivet installation.
3.
Install retainer (4) on plenum (6) with three rivets (5).
4.
Install retainer (2) on plenum (6) with three rivets (1).
Manual References
TM 9-2320-280-24P
