a. Removal
b. Installation
TM 9-2320-280-20-3
12-35. ARCTIC HEATER FILTER-TO-HEATER FUEL SUPPLY HOSE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General Safety Instructions
General mechanic’s tool kit:
Do not perform this procedure near fire, flames,
automotive (Appendix B, Item 1)
or sparks.
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
WARNING
Diesel fuel is highly flammable. Do not perform this procedure
near fire, flames, or sparks. Severe injury or death will result.
CAUTION
Cover or plug all open hoses and connections immediately after
disconnection to prevent contamination. Remove all plugs prior to
connection.
NOTE
Have drainage container ready to catch fuel.
1. Remove two clamps (2) and hose (3) from filter connector (4) and heater connector (1).
2. Inspect filter connector (4) and heater connector (1) for damage. Replace if damaged.
1. Install clamps (2) on hose (3).
2. Install hose (3) on heater connector (4) and heater connector (1) with clamps (2).
FOLLOW-ON TASK: Operate arctic heater (TM 9-2320-280-10) and check for fuel leaks.
12-52
