a. Removal
b. Installation
TM 9-2320-280-20-3
12-30. ARCTIC HEATER FUEL SUPPLY HOSE REPLACEMENT
This task covers:
a. Removal
b. Installation
lNITIAL SETUP:
Tools
General Safety Instructions
General mechanic’s tool kit:
Do not perform this procedure near fire, flames,
automotive (Appendix B, Item 1)
or sparks.
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
WARNING
Diesel fuel is highly flammable. Do not perform this procedure
near fire, flames, or sparks. Severe injury or death will result.
CAUTION
Cover or plug all open hoses and connections immediately after
disconnection to prevent contamination. Remove all covers or
plugs prior to connection.
NOTE
Have drainage container ready to catch fuel.
Loosen two clamps (4) and remove fuel supply hose (3) from tank-to-hose fuel supply line (2) and pump-
to-hose fuel supply line (1).
1. Connect hose (3) to tank-to-hose fuel supply line (2) with clamp (4).
2. Connect hose (3) to pump-to-hose fuel supply line (1) with clamp (4).
FOLLOW-ON TASKS: Operate arctic heater (TM 9-2320-280-10) and check for fuel leaks.
12-44
