2. Install tank-to-hose fuel supply line (3) on fuel tank (1) with clamp (5) and capscrew (4).
a. Removal
b. Installation
TM 9-2320-280-20-3
12-29. ARCTIC HEATER TANK-TO-HOSE FUEL SUPPLY LINE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic’s tool kit:
Fuel tank removed (para. 3-24).
automotive (Appendix B, Item 1)
General Safety Instructions
Materials/Parts
Do not perform this procedure near fire, flames,
Sealing compound (Appendix C, Item 44)
or sparks.
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
WARNING
Diesel fuel is highly flammable. Do not perform this procedure
near fire, flames, or sparks. Severe injury or death will result.
CAUTION
Cover or plug all open hoses and connections immediately after
disconnection to prevent contamination. Remove all covers or
plugs prior to connection.
NOTE
Have drainage container ready to catch fuel.
1. Disconnect tank-to-hose fuel supply line (3) from fuel supply tube assembly (2).
2. Remove capscrew (4), clamp (5), and tank-to-hose fuel supply line (3) from fuel tank (1).
1. Apply sealing compound to threads of tank-to-hose fuel supply line (3) and connect fuel supply
to fuel supply tube assembly (2).
line (3)
FOLLOW-ON TASKS: • Install fuel tank (para. 3-24).
• Operate arctic heater (TM 9-2320-280-10) and check forfuel leaks.
12-43
