TM 9-2320-280-20-3
12-23. 100 AMPERE ALTERNATOR (12340912) REPLACEMENT (Cont’d)
4.
5.
6.
7.
8.
9.
Position alternator (13) on mounting bracket (18) (with support bracket (17) and power steering
lines bracket (23) on the outside of alternator mounting flange (21)) and install spacer (24),
washer (22), two lockwashers (11), and capscrews (10).
Align alternator (13) with hole in adjusting bracket (19), and install washer (16), lockwasher (15),
and capscrew (14). Tighten capscrew (14) finger tight.
Install two drivebelts (1) on alternator pulley (2).
Fill alternator receptacle (3) with silicone.
Install regulator (5) on alternator (13) and secure connector plug (4) between alternator (13) and
regulator (5).
Ensure guard (9) is positioned in rear clamp (8). Install clamp pins (7) into regulator slots (6).
Tighten two clamp nuts (12) to 40 lb-in. (4.5 N•m).
FOLLOW-ON TASKS: • Adjust drivebelts (para. 3-82).
• Connect battery ground cable (para. 4-73).
12-31
