TM 9-2320-280-20-3
11-184. AIR INTAKE COMPARTMENT PANELS REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M997, M997A1, M997A2
TM 9-2320-280-24P
Took
Equipment Condition
General mechanic’s tool kit:
l Blower housing opened (para. 11-198).
automotive (Appendix B, Item 1)
. Front cover panel removed (para. 11-187).
Materials/Parts
Seven lockwashers (Appendix G, Item 109)
a. Removal
1. Remove six screws (2) from panel (3) and condenser fan housing (4).
2. Remove three screws (5), lockwashers (6), and panel (3) from panel (7). Discard lockwashers (6).
3. Remove two screws (1) and lockwashers (15) from panel (7) and air intake assembly (14). Discard
lockwashers (15).
4. Remove two nuts (13), washers (12), screws (8), washers (10), lockwashers (9), and panel (7) from
body (11). Discard lockwashers (9).
1. Install panel (7) on body (11) and air intake assembly (14) with two washers (10), lockwashers (9),
screws (8), washers (12), and nuts (13).
2. Install panel (7) on air intake assembly (14) with two lockwashers (15) and screws (1).
3. Install panel (3) on panel (7) and fan housing (4) with three lockwashers (6) and screws (5).
4. Secure panel (3) to fan housing (4) with six screws (2).
FOLLOW-ON TASKS: l Close blower housing (para. 11-198).
c Install front cover panel (para. 11-187).
11-268
