TM 9-2320-280-20-3
11-182. AMBULATORY PATlENT SEAT REAR CLOSEOUT PANEL REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M996, M996A1
TM 9-2320-280-24P
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
1. Remove two screws (9) from seat brace assembly (1) and closeout panel (4). Push seat brace
assembly (1) up and out of way.
2. Remove two screws (7), washers (6), and seat stop (5) from closeout panel (4) and litter rack (2).
3. Remove three screws (8) and (3) and closeout panel (4) from litter rack (2).
b. Installation
1.
2.
3.
Install closeout panel (4) on litter rack (2) with three screws (8) and (3).
Install seat stop (5) on closeout panel (4) with two washers (6) and screws (7).
Install seat brace (1) on closeout panel (4) with two screws (9).
11-265
