10-21. WINDSHIELD GLASS AND WEATHERSTRIP REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
1.
Remove six capscrews (7) and upper retainer (3) from windshield frame (5).
2.
Remove four capscrews (1) and center retainer (2) from windshield frame (5).
3.
Remove weatherstrip (4) and glass (6) from windshield frame (5).
4.
Clean sealant from windshield frame (5).
WARNING
Use eyeshields and gloves when removing and installing
windshield. Glass could shatter causing injury.
INITIAL SETUP:
Applicable Models
M998, M998A1, M1035, M1035A1, M1035A2,
M1037, M1038, M1038A1, M1042
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Sealant (Appendix C, Item 38)
Manual References
TM 9-2320-280-24P
Equipment Condition
Windshield wiper blade and arm removed
(para. 10-70).
General Safety Instructions
Eyeshields and gloves are required when installing
and removing windshield glass.
b. Installation
1.
Apply a 1/8 inch (3 mm) bead of sealing compound to edge of glass (6) and to windshield frame (5).
2.
Install weatherstrip (4) on glass (6).
3.
Install glass (6) and weatherstrip (4) on windshield frame (5) with center retainer (2) and four
capscrews (1).
4.
Apply a thin bead of sealant to top edge of outside weatherstrip (4).
5.
Install upper retainer (3) on windshield frame (5) with six capscrews (7).
TM 9-2320-280-20-3
10-38
Change 1
