TM 9-2320-280-20-3
11-177. ATTENDANT SEAT STOWAGE BRACKETS REPLACEMENT
I
This task Covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M996, M996A1, M997, M997A1, M997A2
TM 9-2320-280-10
TM 9-2320-280-24P
Tools
General mechanic’s tool kit:
Equipment Condition
automotive (Appendix B, Item 1)
Attendant seat removed from stowed position
Materials/Parts
(TM 9-2320-280-10).
Eight rivets (Appendix G, Item 189)
NOTE
l For instructions on replacement of rivets, refer to para. 10-66.
l Replacement procedures for attendant seat stowage brackets are
basically the same for M996, M996A1, M997, M997A1, and M997A2
ambulances, with the exception of the strap assembly. The strap
assembly is mounted in a vertical position on the body of the M996
and M996A1 ambulance. This procedure covers the attendant seat
stowage brackets in the M997, M997A1, and M997A2 ambulances.
a. Removal
1. Remove four screws (3) and two footman loops (5) from body (1), and remove strap assembly (2)
from footman loops (5).
2. Remove eight rivets (6) and two brackets (7) from body (1).
3. Inspect blind rivet (4) for damage. Replace if damaged.
I
b. Intallation
1. Install two brackets (7) on body (1) with eight rivets (6).
2.
Install strap assembly (2) on two footman loops (5) and install footman loops (5) on body
four screws (3).
(1)with
FOLLOW-ON TASK: Stow attendant seat (TM 9-2320-280-10).
11-259
