TM 9-2320-280-20-3
11-176. EXTERIOR STOWAGE DOOR REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
M996, M996A1, M997, M997A1, M997A2
Adhesive (Appendix C, Item 3)
Fourteen rivets (Appendix G, Item 188)
Tools
Twelve rivets (Appendix G, Item 189)
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-280-24P
NOTE
. For instructions on replacement of rivets, refer to para. 10-66.
l Replacement procedures for left and right exterior stowage doors are
basically the same. This procedure covers the left stowage door.
1. Remove seven rivets (2), hinge (6), and door (8) from body (5).
2. Remove seven rivets (1) and hinge (6) from door (8).
3. Remove four rivets (11) and two rubber latches (10) from door (8).
4. Remove four rivets (9) and two brushguards (12) from door (8).
5. Remove four rivets (3) and two catches (4) from body (5).
6. Remove seal (7) from door (8). Discard seal (7) if damaged.
1. Apply adhesive to seal (7) and install seal (7) on door (8).
2. Install two catches (4) on body (5) with four rivets (3).
3. Install two brushguards (12) on door (8) with four rivets (9).
4. Install two rubber latches (10) on door (8) with four rivets (11).
5. Install hinge (6) on door (8) with seven rivets (1).
6. Install hinge (6) and door (8) on body (5) with seven rivets (2).
11-258
