TM 9-2320-280-20-3
11-155. BULKHEAD DOOR REPLACEMENT (Contd)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Install handle (18) on handle cover plate (19) with three washers (17), screws (16), washers (20, and
nuts (21).
Install handle cover plate (19) on right door (29) with four washers (38) and screws (39).
Install washer (30) and handle (32) on right door (29) with setscrew (31).
Install blackout switch pin (26) on right door (29) with washer (27) and screw (28).
Install two plusnuts (25) and rod guide cover plates (24) on right door (29) with four washers (23)
and screws (22).
Install door retainer (36) on right door (29) with fourteen rivets (33).
Install two strikers (9) on doors (4) and (29) with eight rivets (10).
Install handle (5) and two doughnut washers (6) on left door (4) with two screws (8) and doughnut
washers (7).
Install two hinges (12) on doors (4) and (29) with thirty-four rivets (11).
NOTE
Step 10 applies to M996 and M996A1 vehicles only.
Install strap assembly (35) on right door (29) with two screws (34).
Install hinges (12) on body (3) with thirty-four rivets (11).
Install two catch assemblies (14) on stowage shelves (15) with four rivets (13).
Install seal (37) on right door retainer (36) by pushing into place.
Install seal (2) by starting at top of door opening (1) and pushing seal (2) into place around door
opening (1).
11-226
