TM 9-2320-280-20-3
11-152. STOWAGE DOOR REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
M997, M997A1, M997A2
Twelve rivets (Appendix G, Item 187)
Tools
Manual References
General mechanics tool kit
TM 9-2320-280-24P
automotive (Appendix B, Item 1)
NOTE
l Upper and lower stowage doors are removed and installed
basically the same. This procedure covers the lower stowage
door.
l For instructions on replacement of rivets, refer to para. 10-66.
a. Removal
1. Remove seal (4), if damaged, from door (8).
2. Remove three rivets (3) and door (8) from hinge (2).
3. Remove three rivets (1) and hinge (2) from bulkhead (6).
4. Remove two rivets (5) and hasp (7) from bulkhead (6).
5. Remove four rivets (10) and staple (9) from door (8).
1. Install hasp (7) on bulkhead (6) with two rivets (5).
2. Install staple (9) on door (8) with four rivets (10).
3. Install hinge (2) on bulkhead (6) with three rivets (1).
4. Install door (8) on hinge (2) with three rivets (3).
5. Install seal (4) on door (8), if removed.
11-221
