11-156.6
Change 1
1.
Install hose (4) in hole (2) on inner bearing (1).
2.
Connect low-pressure water hose (5) to hose (4).
3.
Turn water on and rotate weapon station tray (3) several full rotations.
NOTE
Allow water to force out any dirt or grit within turret bearing.
4.
Turn water off when cleaning is completed.
5.
Disconnect low-pressure water hose (5) from hose (4).
NOTE
Hose assembly may either be stowed in place on weapon station
tray or removed.
6.
Remove hose (4) from hole (2) on inner bearing (1).
b. Cleaning
TM 9-2320-280-20-3
11-112.1. TURRET CLEANING (Cont'd)
