TM 9-2320-280-20-3
10-103. SOFT TOP DOOR STRIKER REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M998, M998A1, M1035, M1035A1, M1035A2,
TM 9-2320-280-24P
M1037, M1038, M1038A1, M1042, M1097,
M1097A1, M1097A2
Tools
General mechanic's tool kit
automotive (Appendix B, Item 1)
NOTE
Front door strikers are installed with washers and capscrews.
Rear door strikers are installed with star washers and capscrews.
This procedure covers a front door striker.
Remove two nuts (4), washers (2), capscrews (1), washers (2), and door striker (3) from body (5).
Install door striker (3) on body (5) with two washers (2), capscrews (1), washers (2), and nuts (4).
Tighten capscrews (1) to 15 lb-ft (20 N-m).
FOLLOW-ON TASK: Adjust soft top door (para. 10-102).
10-174
