10-102.1. SOFT TOP DOOR HANDLE REPAIR (Cont’d)
c. Installation
1.
Install two nuts (5), washers (3), and insert (2) on screw (4).
2.
Install insert (2) with screw (4) into inner handle (1). Seat bottom washer (3) against handle
surface (1).
3.
Loosen two nuts (5) and remove screw (4), two nuts (5), and washers (3) from insert (2).
4.
Assemble inner handle (1), washer (7), spring (6), and outer handle (8) with screw (4).
5.
Measure length of screw (4) from insert (2).
6.
Remove screw (4) and cut to measurement.
7.
Install washer (7), outer handle (8), spring (6), and inner handle (1) on door (9) with screw (4).
8.
Check door handle for proper operation.
TM 9-2320-280-20-3
10-172.4
Change 1
