10-96. HEATER BOOT REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
1.
Remove ten clips (2) from heater boot (5) and heater assembly (1).
2.
Remove six clips (4) and heater boot (5) from air duct retainer (3).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-280-24P
b. Installation
1.
Install heater boot (5) on air duct retainer (3) with six clips (4).
2.
Install heater boot (5) on heater assembly (1) with ten clips (2).
TM 9-2320-280-20-3
Change 1
10-164.1
