a. Removal
TM 9-2320-280-20-2
7-8. PARKING BRAKE HEAT SHIELD AND HEAT SHIELD EXTENSION REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-24P
automotive (Appendix B, Item 1)
Materials/Parts
Four lockwashers (Appendix G, Item 113)
Felt sheet (Appendix D, Fig. 84)
Heat Shield Extension (Appendix D, Fig. 85)
N O TE
The head shield extension is used for extra protection of the
parking brake. The replacement of it can be left up to the
discretion of the commander.
The following procedure applies to vehicles with serial numbers
USBL Eff. 1 through 44824.
1. Remove two capscrews (8) and lockwashers (7) from heat shield extension (1), heat shield (2) and
parking brake bracket (3). Discard lockwashers (7).
2. Remove capscrew (4), heat shield extension (1), and felt sheet (5) from crossmember (6). Discard felt
sheet (5).
3. Remove two nuts (12), lockwashers (11), heat shield (2), capscrews (9), and washers (10) from heat
shield extension (1). Discard lockwashers (11).
7-17
