TM 9-2320-280-20-2
5-52.4
Change 2
5-25. TRANSFER CASE VENT LINE REPLACEMENT (Cont’d)
9.
Connect vent line (13) to elbow (14) and elbow (16).
10.
Install vent line (11) on transmission governor cover (6) and bracket (8) with two clamps (4) and
capscrews (5). Tighten capscrews (5) to 15 lb-ft (20 N•m).
11.
Connect vent line (11) to elbow (16).
12.
Secure vent lines (13) and (15) with two tiedown straps (12).
13.
Install pipe nipple (9) and elbow (10) to transfer case (3).
14.
Connect vent line (11) to elbow (10).
15.
Install two clamps (4) on vent line (2).
16.
Connect three vent lines (2) to tee (7).
17.
Install two clamps (4) and capscrews (5) on bracket (8) and transmission governor cover (6).
Tighten capscrews (5) to 15 lb-ft (20 N•m).
18.
Install elbow (1) in transfer case (3).
19.
Connect vent line (2) to elbow (1).
NEW CONFIGURATION
OLD CONFIGURATION
