4-108. INTERCOM CABLE REPLACEMENT (M997, M997A1, M997A2) (Cont'd)
7.
Install grommet (3), retainer (4), intercom cable (2), wiring harness (10), and two cables (6) on
body (5) with two capscrews (8), washers (7), clamp (9), and two nut and lockwasher assemblies (1).
8.
Install three clamps (12), intercom cable (2), antenna cables (6), and wiring harness (10) on body (5)
with three screws (13).
9.
Install clamp (17), intercom cable (2), and antenna cables (6) on plate (16) and windshield (11) with
washer (15) and screw (14). Tighten screw (14) to 71 lb-in. (8 N•m).
10.
Install three clamps (19), intercom cable (2), and antenna cables (6) on windshield (11) with three
screws (18).
11.
Install clamp (21), intercom cable (2), and antenna cables (6) on radio rack (23) with washer (20) and
capscrew (25). Tighten capscrew (25) to 71 lb-in. (8 N•m).
12.
Secure intercom cable (2), antenna cables (6), and power cable (24) together with two tiedown
straps (22) on radio rack (23).
TM 9-2320-280-20-2
4-252
Change 2
