4-108. INTERCOM CABLE REPLACEMENT (M997, M997A1, M997A2) (Cont'd)
b. Installation
1.
Install intercom cable (1) on intercom (14).
2.
Route intercom cable (1) in vehicle in approximate mounting location.
3.
Install grommet (10), retainer (11), and wiring harness (8) over yellow tape (9), and intercom
cable (1) on body (6) with two washers (12) and screws (13).
4.
Install two clamps (5.1), intercom cable (1), and wiring harness (8) on body (6) with two
capscrews (5.2) and nut and lockwasher assemblies (5.3).
5.
Install two clamps (5), intercom cable (1), and wiring harness (8) on body (6) with two screws (4).
6.
Install cover (2), intercom cable (1), and wiring harness (8) on body (6) with three capscrews (7) and
nut and lockwasher assemblies (3).
7.
Remove three nut and lockwasher assemblies (3), capscrews (7), and cover (2) from body (6). Discard
nut and lockwasher assemblies (3).
8.
Remove two screws (4), clamps (5), intercom cable (1), and wiring harness (8) from body (6).
9.
Remove two nut and lockwasher assemblies (5.3), capscrews (5.2), and clamps (5.1) from body (6).
Discard nut and lockwasher assemblies (5.3).
10.
Remove two screws (13), washers (12), grommet (10), retainer (11), intercom cable (1), and wiring
harness (8) from body (6).
11.
Remove intercom cable (1) from intercom (14) and vehicle.
TM 9-2320-280-20-2
4-250
Change 2
