TM 9-2320-280-20-2
3-19. AIR RESTRICTION GAUGE HOSE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic’s tool kit:
Engine access cover removed (para. 10-15).
automotive (Appendix B, Item 1)
Hood raised and secured (TM 9-2320-280-10).
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
1. Loosen three clamps (2) from air restriction gauge hose (6) and “A” beam (1).
2. Disconnect hose (6) from air cleaner assembly (7).
3. Disconnect hose (6) from air restriction gauge (4) located behind instrument panel (5).
4. Remove hose (6) by routing out from three clamps (2) through two grommets (3) in “A” beam (1).
b. Installation
1. Route hose (6) through three clamps (2) and two grommets (3) in “A” beam (1) to air cleaner
assembly (7) and gauge (4).
2. Connect hose (6) to air cleaner assembly (7).
3. Connect hose (6) to gauge (4).
4. Tighten three clamps (2) on hose (6) and “A” beam (1).
FOLLOW-ON TASKS: Install engine access cover (para. 10-15).
Lower and secure hood (TM 9-2320-280-10).
3-32
