3-17. AIR RESTRICTION GAUGE REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
1.
Remove two screws (2) and bezel (1) from air restriction gauge (3) and pull gauge (3) from behind
dash panel (5).
2.
Disconnect air restriction gauge hose (4) from gauge (3) and remove gauge (3).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
b. Installation
1.
Connect hose (4) to gauge (3).
2.
Position gauge (3) behind dash panel (5) and secure to bezel (1) with two screws (2).
TM 9-2320-280-20-2
3-30
Change 2
FOLLOW-ON TASK: Start engine (TM 9-2320-280-10) and check operation of air restriction gauge.
