TM 9-2320-280-20-2
4-98. CONTROL BOX POWER CABLES REPLACEMENT (Contd)
9. Install positive cable (15) and NBC harness cable (16) on control box power stud (18) with
washer (8), lockwasher (9), and nut (10).
10. Install ground cable (2) on ground stud (19) with lockwasher (3) and (4).
11. Install two clamp (11), power harness (13), and NBC harness (14) on screw (17) with nut and
lockwasher assembly (12).
12. Install cover (7) on control box (1) with four lockwashers (5) and screws (6).
13. Install two clamps (22) and power harness (13) on body (21) with two screws (20).
NOTE
Step 14 applies to M996 and M996A1 vehicles only.
14. Install five clamps (22) and power harness (13) on body (21) with four screws (20).
4-192