TM 9-2320-280-20-2
4-94. BULKHEAD DOOR BLACKOUT SWITCH AND BRACKET MAINTENANCE
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M996, M996A1, M997, M997A1, M997A2
TM 9-2320-280-10
TM 9-2320-280-24P
Tools
General mechanic’s tool kit:
Equipment Condition
automotive (Appendix B, Item 1)
Battery ground cable disconnected (para. 4-73).
Materials/Parts
Four lockwashers (Appendix G, Item 111)
1. Remove two screws (5) and washers (6) from switch cover (7) and bracket (4). Slide cover (7) away
from switch (14) to allow access to switch (14).
NOTE
Prior to removal, tag leads for installation.
2. Remove two screws (10) lockwashers (11), and two leads (12) and (13) from switch (14). Discard
lockwashers (11).
3. Remove cover (7) and grommet (9) from wiring harness (8).
4. Remove two nuts (1), lockwashers (2), screws (16), switch (14), and switch lever (15) from bracket (4).
Discard lockwashers (2).
5. Remove two screws (3) and bracket (4) from body (17).
1. Install bracket (4) on body (17) with two screws (3).
2. Install switch (14) and switch lever (15) on bracket (4) with two acrews (16), lockwashers (2), and nuts (1).
3. Install cover (7) and grommet (9) on wiring harness (8).
4. Connect two leads (12) and (13) to switch (14) with two lockwashers (11) and screws (10).
5. Slide cover (7) over switch (14) on bracket (4) with two washers (6) and screws (5).
4-172
