TM 9-2320-280-20-2
4-62. DIRECTIONAL SIGNAL FLASHER REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-10
automotive (Appendix B, Item 1)
TM 9-2320-280-24P
Materials/Parts
Equipment Condition
Two lockwashers (Appendix G, Item 112)
Battery ground cable disconnected (para. 4-73).
Silicone compound (Appendix C, Item 48)
NOTE
The flasher is located under the instrument panel to the left of the
steering column.
a. Removal
1. Remove cannon plug (1) from main light switch (2).
2. Remove comector plug (7) from flasher (5).
3. Remove two nuts (3), lockwashers (4), screws (6), and flasher (5) from instrument panel (8). Discard
lockwashers (4).
b. Installation
1.
2.
3.
Install flasher (5) on instrument panel (8) with two screws (6), lockwashers (4) and nuts (3).
Apply silicone compound to threads of connector plug (7). Install connector plug (7) on flasher
Connect cannon plug (1) to main light switch (2).
(5).
FOLLOW-ON TASKS: Connect battery ground cable (para. 4-73).
Check directional signal flasher for proper operation (TM 9-2320-280-10).
4-102
