TM 9-2330-392-14&P
4-10
Change 2
Table 4-1. Unit Preventive Maintenance Checks and Services (PMCS)
for M1101, M1102, and Trailer Chassis - Continued
Item
No.
Interval
Location
Procedure
Not Fully Mission
Capable If:
Item To
Check/
Service
8
Semi-
annual
Hydraulic
Brake
System
a.
Inspect brake lines and hoses for defects
such as missing clamps, cracks, leaks,
loose connections, or broken lines.
Repair as needed (para 4-31).
a.
Any leaks are found.
b. Inspect master cylinder assembly for
damage or missing cap, leaks, and proper
fluid level. If cap is damaged or missing,
replace it. Proper fluid level is 1/8 in. (3
mm) below top of edge of reservoir. If
not at specified level, add fluid in accor-
dance with Appendix G.
b.
Any leaks are found.
c.
Visually check brake breakaway cable
and breakaway lever for damage and
missing parts. Check that breakaway
lever is in down position. If damaged or
missing parts, repair as needed (para 4-
27).
c.
Cable or lever is missing or dam-
aged.
9
Semi-
annual
Lights,
Reflectors,
and Wiring
a.
Visually inspect lights and reflectors for
missing or broken parts or loose connec-
tions. If any connectors are loose,
tighten. If reflectors are missing or bro-
ken, replace.
a.
Any lights are missing or broken.
b. Inspect wiring harness and intervehicular
cable for exposed, frayed, or damaged
wiring or missing mounting hardware. If
damaged, replace (para 4-19).
b.
Wiring
harness
or
cable
is
exposed,
frayed,
or
damaged.
Mounting hardware is missing.
c.
Connect intervehicular cable to towing
vehicle (para 2-10). Operate towing
vehicle light switch through all settings
and check trailer lights. If any are inoper-
ative or unserviceable, repair as needed.
c.
Other than marker lights, one or
more lights are inoperative or
unserviceable.
10
Semi-
annual
Front
Support Leg
a.
Check front support leg for damage,
missing parts, and proper operation.
Check that caster moves freely and han-
dle can be cranked up and down to raise
and lower trailer. Repair or replace as
needed (para 4-44).
b. Fully extend support leg and clean as
necessary.
c.
Remove support leg cover and lubricate
(App G).
