TM 9-2330-392-14&P
CHAPTER 3
OPERATOR MAINTENANCE INSTRUCTIONS
Page
Paragraph
Title
Number
Section I -
LUBRICATION INSTRUCTIONS ....................................................................................................
3-1
Section II -
OPERATOR TROUBLESHOOTING PROCEDURES ....................................................................
3-1
3-1 -
GENERAL .......................................................................................................................................
3-1
3-2 -
EXPLANATION OF COLUMNS ......................................................................................................
3-2
3-3 -
MALFUNCTION INDEX ..................................................................................................................
3-2
Section I. LUBRICATION INSTRUCTIONS I
Lubrication instructions are in Appendix G of this technical manual.
All lubrication instructions are mandatory.
Section II. OPERATOR TROUBLESHOOTING PROCEDURES
3-1.
GENERAL.
a.
This section provides information for identifying and correcting malfunctions that may develop while operating
your trailer.
b.
The Malfunction Index in paragraph 3-3 lists common malfunctions that may occur and also refers you to the
proper page in Table 3-1 for a troubleshooting procedure.
c.
If you are unsure of an item mentioned, refer to paragraph 1-8 or the maintenance task where the item is
replaced.
d.
Before performing a troubleshooting procedure, read and follow all safety instructions found in the Warning
pages at the front of this manual.
e.
This section cannot list all malfunctions that may occur or all tests, inspections, and corrective actions. If a
malfunction is not listed or is not corrected by listed corrective actions, notify Unit maintenance.
f.
When troubleshooting a malfunction:
(1) Locate the malfunction in the Malfunction Index in paragraph 3-3 that best describes the malfunction.
(2) Turn to the page in Table 3-1 where the troubleshooting procedure for the malfunction in question is described.
Headings at the top of each page show how each troubleshooting procedure is organized: Malfunction, Test or
Inspection (in step number order), and Corrective Action.
(3) Perform each Test or Inspection step in the order listed until the malfunction is corrected. Do not perform any
maintenance task unless the troubleshooting procedure tells you to do so.
3-1
