EXPLANATION OF COLUMNS (SECTION II) (Cont).
d. Column (4), Part Number. Indicates the primary number used by the manufacturer (individual, company, firm,
corporation, or Government activity) that controls the design and characteristics of the item by means of its
engineering drawings, specifications standards, and inspection requirements to identify an Item or range of items.
When you use an NSN to requisition an item, the item you receive may have a different part number from
the part ordered
Column (5), Description and Usable On Code (UOC). This column includes the following information:
(1) The Federal item name and, when required, a minimum description to identify the item.
(2) The physical security classification of the item is indicated by the parenthetical entry (insert applicable physical
security classification abbreviation; e.g., Phy Sec C1 (C) - Confidential, Phy Sec C1 (S) - Secret, Phy Sec C1 (T) -
(3) Items that are included in kits and sets are listed below the name of the kit or set.
(4) Spare/repair parts that make up an assembled item are listed immediately following the assembled item line entry.
(5) Part numbers for bulk materials are referenced in this column in the line item entry for the item to be
(6) When the item is not used with all serial numbers of the same model, the effective serial numbers are shown on
the last line(s) of the description (before UOC).
(7) The usable on code, when applicable (paragraph F-5, Special Information).
(8) In the Special Tools List section, the Basis of Issue (BOI) appears as the last line(s) in the entry for each special
tool, special TMDE, and other special support equipment. When density of equipment supported exceeds density
spread indicated in the BOI, the total authorization is increased proportionately.
(9) The statement END OF FIGURE appears just below the last item description in Column (5) for a given figure in
both section II and section III.
Column (6), QTY. The QTY (quantity per figure column) indicates the quantity of the item used in the breakout
shown on the illustration figure, which is prepared for a functional group, sub-functional group, or an assembly A
V appearing in this column in lieu of a quantity indicates that the quantity is variable, i e, the quantity may vary
from application to application.