TM 9-2330-392-14&P
4-128
Change 2
4-44
FRONT SUPPORT LEG AND PIVOT REPAIR (Con’t).
c.
FRONT SUPPORT LEG DISASSEMBLY
1.
Remove locknut (20) and bolt (22) from front support leg (4). Discard locknut (20).
2.
Remove caster assembly (21) from front support leg (4).
3.
Remove cotter pin (19) from pin assembly (18) and front support leg (4). Discard cotter pin (19).
4.
Remove locknut (23), handle (24), and washer (25) from side wind crank (26). Discard locknut (23).
5.
Remove two nuts (17), washers (16), and bolts (14) from front support leg (4). Remove top cover (15).
6.
Remove pin (30) from gear (28).
NOTE
Number of spacers may vary.
7.
Remove side wind crank (26), gear (28), and spacer(s) (29), from front support leg (4).
8.
Remove gear (27) from front support leg (4).
