TM 9-2330-392-14&P
4-31
HYDRAULIC BRAKE LINES REPLACEMENT (Con’t).
g. REAR SOLID BRAKE LINE REMOVAL
NOTE
Both rear solid brake lines are removed in the same manner.
1.
Remove clip (7) securing flex brake line (10) and solid brake line (8) to bracket (9).
2.
Disconnect flex brake line (10) from solid brake line (8) and install temporary plug in flex brake line (10).
3.
Disconnect solid brake line (8) from “tee” (6) and install temporary plug in “tee” (6).
4.
Remove rivet (5) and clamp (4) securing solid brake line (8) to frame. Remove solid brake line (8). Discard
rivets.
h.
REAR SOLID BRAKE LINE INSTALLATION
NOTE
Both solid brake lines are replaced in the same manner.
1.
Remove temporary plug from “tee” (6) and connect solid brake line (8) to “tee” (6). Tighten flare fitting.
2.
Remove temporary plug from flex brake line (10) and connect solid brake line (8) to flex brake line (10).
Tighten flare fitting.
3.
Install clip (7) securing flex brake line (10) and solid brake line (8) to bracket (9).
4.
Install new rivets (5) and clamps (4) securing solid brake line (8) to frame.
FOLLOW-ON TASKS:
Bleed hydraulic system (para 4-26).
4-78
Change 1
