TM 9-2330-392-14&P
Change 2
4-71
4-29
BREAKAWAY LEVER AND LEAF SPRING REPLACEMENT.
This task covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Handbrakes applied.
Wheels chocked (para 2-8.1).
Materials/Parts:
Tiedown strap (Item 12.1, Appendix E)
Tools/Test Equipment:
General mechanics tool kit
Common No. 1 shop set
a.
REMOVAL
1.
Remove four capscrews (5) from hydraulic actuator assembly (1).
2.
Pry master cylinder assembly (4) 1/2 inch from hydraulic actuator assembly (1), providing access to breakaway
lever (2) and leaf spring (3).
3.
Remove hydraulic actuator breakaway lever (2) and leaf spring (3) from hydraulic actuator assembly (1).
4.
If damaged, remove tiedown strap (6) from cable (7).
b.
INSTALLATION
1.
Install hydraulic actuator breakaway lever (2) and leaf spring (3) into hydraulic actuator assembly (1).
2.
Install four capscrews (5) securing master cylinder assembly (4) in hydraulic actuator assembly (1). Torque cap-
screws (5) to 30 ± 3 lb-ft (41 ± 4 N m).
3.
If removed, install tiedown strap (6) on cable (7).
