TM 9-2320-387-24-2
1
2519.
A/C CONDENSER
FAN AND SHROUD REPLACEMENT
I
This task covers:
a. Removal
b. installation
INITIAL SETUP:
Applicable Models
Ml114
Tools
Manual References
TM 9-2320-387-24B
Equipment Condition
General mechanic’s tool kit:
A/C condenser removed (para. 25-W
automotive (Appendix B, Item 1)
Maintenance Level
Direct support
pxizq
1.
Remove five capscrews (8) from shroud (9) and A/C condenser (10).
2.
Remove four nuts (17), capscrews (11, capscrews (5), and fan (4) from shroud (9) and AK
condenser (10).
3.
Remove eight nuts (6), capscrews (111, and fan (7) from shroud (9).
4.
Remove four nuts (21, capscrews (3), and brackets (18) from fan (4).
5.
Remove six capscrews (12) and bracket (13) from A/C condenser (10).
6.
Loosen clamp (15) and remove drain hose (16) from condenser tray (141.
71
1.
Install bracket (13) on A/C condenser (10) with six capscrews (12).
2.
Install four brackets (18) on fan (4) with four capscrews (3) and nuts (2).
3.
Install fan (7) on shroud (9) with eight capscrews (11) and nuts (6).
4.
Install fan (4) on shroud (9) with four capscrews (5).
5.
Secure fan (4) to A/C condenser (10) with four capscrews (1) and nuts (17).
6.
Install shroud (9) on NC condenser (10) with five screws (8).
7.
Install drain hose (16) on condenser tray (14) and tighten clamp (15).
25-54
