TM 9-2320-387-24-2
24-18.
REAR SUSPENSION
FRONT CROSSMEMBER REPLACEMENT (Cont’d)
b. Installation
1.
Install two crossmember mounting brackets (7) on front crossmember (4) with two washers (21,
capscrews (31, washers (2), and locknuts (11.
2.
Install four washers (61, capscrews (51, washers (61, and locknuts (12) on two crossmember mounting
brackets (7) and front crossmember (4).
3.
Install front crossmember (4) on frame rail (13).
4.
Install rear-front tiedown brackets (para. 24-14).
5.
Tighten four locknuts (12) to 260 lb-ft (353 N-m) and two locknuts (1) to 90 ft-lb (122 N-m).
6.
Install two radius rods (10) on crossmember mounting brackets (7) with washers (91, capscrews (111,
washers (91, and locknuts (8). Tighten locknuts (8) to 260 lb-ft (353 Nsm).
7.
Install brake line (171 on tube coupling (18).
8.
Install brake line (17) and vent line (16) on front crossmember (4) with three clamps (151 and
capscrews (14).
24-32
