24-15. DIFFERENTIAL SUPPORT BRACKET AND SIDE MOUNTING BRACKET
REPLACEMENT
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
O-ring seal (Appendix G, Item 284)
Four locknuts (Appendix G, Item 121)
Locknut (Appendix G, Item 161)
Sealing compound (Appendix C, Item 63)
Manual References
TM 9-2320-387-24P
Equipment Condition
Service brake rotor removed (para. 7-12).
Maintenence Level
Direct support
This task covers:
a. Removal
b. Installation
1.
Remove locknut (5), O-ring seal (4), and output flange (3) from output shaft (2). Discard O-ring (4)
and locknut (5).
2.
Remove two capscrews (7) and brake adapter (6) from differential (1).
3.
Remove two capscrews (12) and washers (13) from differential side mounting bracket (14) and
differential (1).
4.
Remove two locknuts (11), washers (8), capscrews (9), washers (8), and differential support bracket
(10) with side mounting bracket (14) from suspension crossmember (15). Discard locknuts (11).
NOTE
Scribe a locating mark on differential support bracket and side
mounting bracket for installation.
5.
Remove two locknuts (16), washers (17), capscrews (19), washers (17), mounting plate (18), and side
mounting bracket (14) from support bracket (10). Discard locknuts (16).
a. Removal
TM 9-2320-387-24-2
24-20
Change 1
2
3
4
5
6
7
1
