TM 9-2320-387-24-2
I 24-4. SPLASH SHIELD SUPPORT BRACKET REPLACEMENT
-1
This task covers:
a. Removal
b. Installation
INITIAL
SETUP:
Tools
-?&&al
mechanic’s tool kit:
automotive (Appendix B, Item 11
Materials/Parts
Three locknuts (Appendix G, Item 121)
Manual References
TM 9-2320-387-10
Equipment Condition
Hood raised and secured (TM 9-2320-387-10).
Maintenance Level
Direct support
TM 9-2320.387-24P
1 a. Removal
1
1.
Remove locknut (11, washer (21, capscrew (41, washer (21, and splash shield (3) from bracket (7).
Discard locknut (1).
2.
Remove two locknuts (51, washers (61, capscrews (91, washers (61, and bracket (7) from frame rail (8).
Discard locknuts (5).
b. Installation
1.
Install bracket (7) on frame rail (81 with two washers (6), capscrews (91, washers (6), and lock-
nuts (5). Tighten locknuts (51 to 90 lb-R (122 N-m).
2.
Install splash shield (3) on bracket (7) with washer (21, capscrew (4), washer (2), and locknut (1).
Tighten capscrew (4) to 15 lb-R (20 N-m).
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-10).
24-2
