15-27. ENGINE PREPARATION (Cont’d)
16.1
Install mounting bracket (13) on engine (11.2) with collar washer (11.1) and capscrew (12.1).
17.
Install mounting bracket (13) on water pump (12) with two lockwashers (14) and capscrews (15).
NOTE
On M1114 vehicles equipped with A/C, the compressor pulley is in
place of the lower idler pulley.
18.
Install three supports (9.1) and idler pulleys (9) on mounting bracket (13) with three dust covers
(8.1), washers (8), capscrews (7), washers (8), lockwashers (10), and nuts (11).
19.
Install belt tensioner (16) on mounting bracket (13) with capscrew (17).
NOTE
Perform step 20 for M1114 vehicles only.
20.
Install spacer (19) and A/C compressor (23) on bracket (20) and mounting bracket (13) with
washer (23.1), two lockwashers (21), capscrews (18), and nuts (22).
TM 9-2320-387-24-2
Change 1
15-93
7
8
8.1
9
7
8
8.1
9
9.1
8
10
11
12
13
14
15
16
17
7
10
8
11
9.1
11
10
8
9
18
19
18
23
23.1
20
22
8
12.1
21
13
21
8.1
9.1
11.1
11.2
