TM 9-2320-387-24-2
15-26. ENGINE REMOVAL (Cont’d)
WARNING
Hood must be supported during removal. Failure to support hood
may cause injury to personnel and damage to quipment.
3.
Remove four screws (13),lockwashers (121, and bracket (11) from airlift bracket (15). Discard
lo&washers ( 12).
4.
Lower hood (3) and remove two cotter pins (41, washers (51, hinge pins (81, and washers (5) from
upper hinge halves (7) and lower hinge halves (6). Discard cotter pins (4).
5.
Remove hood (3) with prop rod (14) and bracket (11) attached.
6.
Remove two cover plates (9) and seals (10) from airlift brackets (15).
