10-12. CENTER HOOD STOP REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
Remove two capscrews (1), washers (2), center hood stop (3), and plate (4) from A-beam (5).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Hood raised and secured (TM 9-2320-387-10).
Maintenance Level
Unit
b. Installation
Install center hood stop (3) and plate (4) on A-beam (5) with two washers (2) and capscrews (1). Tighten
capscrews (1) to 12 lb-ft (16 N•m).
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-10).
TM 9-2320-387-24-2
Change 1 10-21
2
3
4
1
5
