TM 9-2320-387-24-2
11-62
Change 1
This task covers:
a. Removal
c.
Installation
b. Inspection
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Fourteen locknuts (Appendix G, Item 178)
Sealing compound (Appendix C, Item 72.1)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
• Fire extinguisher removed (TM 9-2320-387-10).
• Left passenger seat removed (para. 10-45).
Maintenance Level
Unit
1.
Remove three capscrews (15) from A-pillar to rocker gap plate (16) and A-pillar armor (17).
2.
Remove four locknuts (1), washers (3), capscrews (13), A-pillar to rocker gap plate (16), rocker panel
armor (14), and four washers (7) from rocker panel (6) and inside protection plate (18). Discard
locknuts (1).
3.
Remove six locknuts (2), washers (3), capscrews (12), rocker panel armor (11), inside protection
plate (18), and six washers (7) from rocker panel (6). Discard locknuts (2).
4.
Remove four locknuts (4), washers (3), capscrews (10), capscrew (8), rocker panel armor (9), inside
protection plate (5), and four washers (7) from rocker panel (6). Discard locknuts (4).
Refer to para. 10-56 for plusnut inspection and replacement.
1.
Apply sealing compound to threads of capscrew (8), and install four washers (7), rocker panel armor
(9), and inside protection plate (5) on rocker panel (6) with four capscrews (10), washers (3),
locknuts (4), and capscrew (8). Do not tighten locknuts (4).
2.
Install six washers (7), rocker panel armor (11), and inside protection plates (5) and (18) on rocker
panel (6) with six capscrews (12), washers (3), and locknuts (2). Do not tighten locknuts (2).
3.
Install rocker panel armor (14), four washers (7), inside protection plate (18), and A-pillar to rocker
gap plate (16) on rocker panel (6) with four capscrews (13), washers (3), and locknuts (1). Do not
tighten locknuts (1).
4.
Apply sealing compound to threads of three capscrews (15), and secure A-pillar to rocker gap plate
(16) to A-pillar armor (17) with capscrews (15). Tighten capscrews (15) to 35 lb-ft (47 N•m).
5.
Tighten locknuts (1), (2), and (4) to 10 lb-ft (14 N•m).
c. Installation
b. Inspection
a. Removal
11-34. LEFT SIDE ROCKER PANEL ARMOR AND INSIDE PROTECTION PLATE
MAINTENANCE
