TM 9-2320-387-24-2
I
29-3. TRANSFER CASE REPAIR (Cont’d)
I
25. Remove nut (221, washer (211,
and shift lever (20) from sector shaft (19).
26.
Remove plug (23) from low-range fork access hole (18).
27.
Using screw extractor in tapered drive pin (241, turn counterclockwise and withdraw tapered drive
pin (24) from low-range fork access hole (18). Discard tapered drive pin (24).
28.
Remove shifter detent plug (171, spring (161, and poppet (15) from front half-case (7).
29.
Remove two nuts (131, washers (121, and oil cooler (11) from front half-case (7).
30.
Remove two O-rings (14) from oil cooler (11). Discard O-rings (14).
0 16
29-7
