28-90
Change 1
TM 9-2320-387-24-2
28-19. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES
(Cont’d)
o. Oil Pan and Filter Assembly Installation
1.
Install filter (5) on transmission case (6).
2.
Install magnet (4) in oil pan (1).
NOTE
Do not use a sealer or adhesive on oil pan seal, oil pan, or
transmission case surface.
3.
Install gasket seal (3) and oil pan (1) on transmission case (6) with seventeen capscrews (2).
Tighten capscrews (2) to 18 lb-ft (24 N•m).
p. Speed Sensors Installation
Install two O-rings (7), speed sensors (8), and brackets (9) on transmission case (6) with capscrews (10).
1997-1998
TRANSMISSION
1995-1996
TRANSMISSION
1997-1998
TRANSMISSION
