TM 9-2320-387-24-2
28-6.
PARKING LOCK PAWL AND ACTUATOR ASSEMBLY INSPECTION
This task covers:
Inspection
INITIAL SETUP:
Manual References
Maintenance
Level
TM 9-2320-387-24P
General support
Equipment Condition
Transmission
disassembled
into subassemblies
(para. 28-3).
1.
2.
3.
4.
Return spring is part of transmission.
Inspect parking lock paw1 (2) for cracks and burrs. Remove any minor burrs. Replace if cracked.
Inspect paw1 shaft (1) for cracks, burrs, and damaged flats. Remove minor burrs. Replace if
damaged.
Inspect detent lever (3) and manual shaft (5) for cracks, burrs, or threads. Replace both if either is
damaged.
Inspect actuator assembly (6) for cracks, burrs, free movement, and damaged spring. Replace if
damaged.
5.
Inspect return spring (7) for breaks and distortion. Replace if damaged.
6.
Inspect retaining pin (4) for tightness. Replace if damaged.
NOTE
,.
28-24
